Why was SPECTER chosen specifically for the 6.5 Creedmoor project?

The bolt group and SPECTER stock have a tremendous safety margin and are designed to handle .375 CT caliber loads. The load of the 6.5 Creedmoor caliber is negligible for them, which allows the full potential of the caliber to be realized and heavy bullets with high BC to be used at maximum velocities. The safety margin across all components of the rifle will ensure its long service life, including a large number of barrel replacements.

▪️As with all BespokeGun models, in the SPECTER the receiver is bedded into the stock (while maintaining access to all components requiring maintenance, including the trigger group). For many rifles, moisture, dew, or liquid getting under the receiver — for example during cleaning — has a catastrophic effect on accuracy; in such cases, a complete disassembly of the rifle is required to remove the liquid. Furthermore, the non-separable connection increases the reliability of the firearm in the event of damage and significantly improves accuracy and operational stability of the rifle.

In BespokeGun rifles, the connection between the receiver and the stock is protected against moisture, dirt, and dust ingress, and offers high rigidity and reliability. This ensures high stability of the rifle across various climatic conditions and eliminates 'cold bore shots' even under fairly harsh operating conditions.

▪️The ideal balance in the middle section of the rifle and optimal weight allow for comfortable shooting both from a tripod and from bipods. The optimal and properly distributed weight eliminates the need to add extra weights to the rifle.

▪️The bipod mounts are positioned far forward, which allows for proper recoil during the shot.

▪️The extended structural carbon quad rail significantly increases the rigidity of the front section of the forend. The structural part of the quad rail is made from a composite material that is significantly stronger than aluminum, allowing the bipods to be mounted far forward.
The carbon quad rail with M-Lok ventilation slots dissipates heat from an overheated barrel away from the scope, minimizing the phenomenon known as mirage.

▪️A Picatinny rail for an objective lens attachment is integrated into the quad rail, allowing optical devices and accessories of greater weight to be mounted.

▪️The stock is adjustable in all planes, allowing the rifle to be configured to suit any shooter's individual anatomical characteristics.

▪️Multi-caliber capability, achieved by replacing the bolt head, trigger guard, magazine, and barrel.

▪️Guaranteed barrel replacement.

▪️The trigger group is removable (it can be detached without dismounting the receiver or fully disassembling the rifle). It is possible to install any REM-type trigger group.

▪️Carbon magazine. Carbon has low thermal conductivity, so cartridges stored in it are more thermally stable. The design also ensures consistent accuracy and precision both 'off the shelf' and when feeding cartridges from the magazine, thanks to a feeding ramp integrated into the design.

▪️The possibility of manufacturing a chamber with an individual configuration tailored to a specific ammunition size.

▪️The rifle is delivered as a ready-to-use system, with a scope installed and zeroed, along with bipods and a level.

▪️A final ammunition recipe tailored to your specific tasks, available with one imported and two Russian powders. There is also the option to purchase any quantity of reference-grade ammunition at any time.

▪️The classic (non-quick-detach) threaded connection between the barrel and bolt group ensures the reliability of the shooting system. And when replacing the barrel, it guarantees the preservation of the original characteristics (accuracy, precision, stability).

▪️The guaranteed performance characteristics of the system are confirmed by the customer during an acceptance shooting session.